One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 3/16" Cutting Diameter 7/8" Cutting Length 1/2" Overall Length 2-13/32" Shank Diameter 1/2"

One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 1/8" Cutting Diameter 3/4" Cutting Length 13/32" Overall length 2-1/8" Shank Diameter 1/4"

One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 3/16" Cutting Diameter 7/8" Cutting Length 1/2" Overall Length 2-3/16" Shank Diameter 1/4"

One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 1/16" Cutting Diameter 5/8" Cutting Length 1/4" Overall Length 1-7/8" Shank Diameter 1/4"

One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 1/8" Cutting Diameter 3/4" Cutting Length 13/32" Overall Length 2-5/16" Shank Diameter 1/2"

One of the most-used bits designed for decorative edges. Lower the depth of the bit to produce a bead on top. Cutting Radius 1/16" Cutting Diameter 5/8" Cutting Length 1/4" Overall Length 2-5/32" Shank Diameter 1/2"

Down-shear flush trim bits eliminate tear out with less vibration. Creates a smoother surface than a standard two-flute while giving better chip clearance. Cutting Diameter 3/4" Cutting Length 1" Overall Length 2-1/2" Shank Diameter 1/4"

Ideal for beveling and decorative edges. Used for producing mitered frames of different angles on planters, boxes, column, or beams. Cutting Angle 45 Cutting Diameter 1-1/4" Cutting Length 17/32" Overall Length 2-3/16" Shank Diameter 1/4"

Cutting Angle 45* Cutting Diameter 1-3/4" Cutting Length 29/32" Overall Length 2-3/4" Shank Diameter 1/2"

Designed for many uses such as table legs and other furniture details. By rotating the stock, a full bead can be formed in 2 passes. Cutting Radius 3/4" Cutting Diameter 2-1/8" Cutting Length 2" Overall Length 4" Shank Diameter 1/2"

Designed for many uses such as table legs and other furniture details. By rotating the stock, a full bead can be formed in 2 passes. Cutting Radius 3/8" Cutting Diameter 1-3/8" Cutting Length 1-1/8" Overall Length 3-5/32" Shank Diameter 1/2"

These bits are used to produce imitation raised panel doors. Bit is plunged into MAF or plywood to create a profile that will give the look of a raised-panel door. Great for utility cabinets or painted doors. Cutting Radius 1/4" Cutting Diameter...