Washer replacement for the Hinge Boring Jig. Used on the handles.

The nylon shutter pin is for 2-1/2" and 3-1/2" louvers. They support the louvers in the shutter panel, and allow the louver to rotate. The narrow end of the shutter pin is inserted into the louver. The large end of the shutter pin is inserted into the...

Tube replacement for Hinge Boring Jig.  Used with the handles.

Custom 1/4" cutter that can be interchanged with the pattern cutter for regular 1/4" thick plywood. IMPORTANT: You will also have to shim the cope cutter and raised panel bit with 1/32" shim making them 1/4" to allow for perfect fit.

Sommerfeld's 3-wing slot cutters will give you clean entry cuts without kickback while producing square slots with a clean, flat bottom.

Our new mounting tool eliminates the need for measuring and marking becuase it uses the intersection of the stile and rail as a reference point so that each cabinet track is mounted accurately. The new magnetic design improves the ease of use of this...

Drop a small, 1/2" rubber grommet into the collet before inserting any of our bits in our matched sets. After considerable research and more than 10 years' experience using this method, we have determined that the shanks of all our matched-length...

Stop Ring replacement for Hinge Boring Jig. Two are used on the jig.

Spacer C replacement for the Hinge Boring Jig.  Used on the 35mm bit.

Sommerfeld's 3-wing slot cutters will give you clean entry cuts without kickback while producing square slots with a clean, flat bottom.

Used to plane edges, cut grooves, rabbets, slots, or dadoes. Also can be used for mortising and carving applications, or where a flat bottom is required.

Handle replacement for Hinge Boring Jig. Two are used for the jig.