Accessories and Supplies

Marc's bent wrench allows you to change bits in seconds from above the top; no need to raise or lower the router. The opening size is 22.2mm or 7/8"

Marc's bent wrench allows you to change bits in seconds from above the top; no need to raise or lower the router. The opening size is 23.8mm or 15/16"

Triton has changed the collet on their router since we have demonstrated it in our DVD's. In our DVD's Marc shows a quick quarter turn to release the bit. Since then Triton has put a safety lock on all their routers as has ALL other router manufactures...

This spanner wrench comes with our table top packet. It is used to tighten and loosen our router table rings into position on our table top.

This locking pin comes in our fence packet. It is positioned through the fence onto the table to hold the fence in place and also to pivot out of the way when changing bits.

Drop a small, 1/2" rubber grommet into the collet before inserting any of our bits in our matched sets. After considerable research and more than 10 years' experience using this method, we have determined that the shanks of all our matched-length...

8 plastic twist-lock Insert Rings for the table Solid 1/2" 3/4" 1" 1-14" 1-1/2" 2" 2-5/8" Also sold individually.

3/4" Router Table Ring

1-1/4" Router Table Ring

2-5/8" Router Table Ring

1-1/2" Router Table Ring