Finger Joint Bit 1-21/32"CD,1/2"SH

Finger Joint Bit 1-21/32"CD,1/2"SH
Product Code: FJ4202A
Availability: In Stock
Price: $83.90
Qty:  
   - OR -   

Cutting Diameter 1-21/32" Cutting Length 1-1/2" Overall Length 3-15/16" Shank Diameter 1/2"

Instructions for the Finger Joint Bit!

  • Put on safety glasses and hearing protection!
    • Cut several 3 in wide by 12 inch long scraps of material the same thickness as your project's stock. These will be used to dial in the router bit and fence for a perfect fit.
      • Install finger joint router bit into router.
        • Adjust the height of the bit to the project's thickness that you are using.The top of the bit cutting edge should be even with the top of your project's wood surface.
          • Adjust the fence so that it is even with the inside cutting surface of the finger joint router bit.
            • Place a piece of scrap material against the rotuer table fence. Adjust your feather boards to hold the stock fimly down and against the router table and fence.
              • Start the router and run one piece of scrap material through the router table.
                • Adjust the router bit height so that it will fit into the scrap piece of material for the opposing side.
                  • Place a second piece of scrap material against the router table fence. Adjust your feather boards to hold the stock firmly down and against the router table and fence.
                    • Start the router and run the second piece of scrap material through the router table.
                      • Lay both test pieces of scrap material on a flat surface and check the fit. the two pieces should fit together with no gaps and be flush with each other.
                        • Repeat steps 9 through 11 until the pieces form a perfect joint. Save the two pieces of test scrap material for templates to set the router and fence quickly and accurately for future bit setup.Item # FJ4202A

                           




Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags:
.
Sommerfeld Tools for Wood © 2020

We Gladly Accept:



Website Design