Triton has changed the collet on their router since we have demonstrated it in our DVD's. In our DVD's Marc shows a quick quarter turn to release the bit. Since then Triton has put a safety lock on all their routers as has ALL other router manufactures on the market. It will now take you a few more seconds to release the bit by having to turn the nut on the collet 2-1/2 turns. TRITON ROUTER WARRANTY-ALL WARRANTY ISSUES AND SPARE PARTS WILL BE RESOLVED BY TRITON TOOLS EXCLUSIVELY: (980-297-7257).

The Triton Router comes with the above table winder height adjustment. For convenience...muscle...and value..you can't beat the Triton Router. In fact, Marc likes it so much, the mounting holes* for them are already pre-drilled in the surface of every Sommerfeld's Routing System Table.

The built-in shaft lock and single wrench system make bit changes quick and easy. Turn on the switch, rotate the speed dial to match your speed to the material and bit you're using and say goodbye to burning. Use the button on the winder knob to select rack-and-pinon or free plunge mode. Left undepressed, cut depth is controlled by pulling the clutch ring on the back of the winder knob and rotating the knob in either direction...moving the router up or down.

Power is 3-1/4HP Amperage is 15 A Speed Control is Variable speed with soft start & continuous speed control under load RPM Range is Infinitely adjustable-8,000 to 21,000 rpms

Collets Included are 1/2" and 1/4" Plunge Range is 2-21/32" (from top to start of interlock) 19/32" (from start of interlock to full plunge) Micro-Adjustment is Infinite throughout full plunge range.

Yes-height adjustment crank included Plunge Pre-Sets is Yes, 3-Step Bases Diameter is 7" Max. Bit Diameter is 3-1/2" Dust Collection is Integrated 1-1/2" O.D. dust port Weight is 13.5 lbs.

Warranty is 3 years

Country of Origin is Taiwan- (Australian designed)

Be sure to include the WR003 Offset wrench for a discount price of $10.00!

 Always Free Shipping!